The Grabber Difference in Heavy-Duty Equipment Mounts!
Keeping expensive power tools, diamond blades, and coring gear secured during transport is essential for field safety and equipment longevity. Grabber Power Products manufactures high-strength mounts designed specifically for truck beds, toolboxes, and trailers. Developed by industry professionals who understand severe jobsite demands, our full lineup of mounts—including swing-out blade racks, core bit organizers, flat saw hold-downs, and wall saw brackets—delivers the structural durability needed to protect your gear and streamline daily setup.
MOUNTS
Outfitting work trucks and trailers with dedicated mounts prevents heavy gear from sliding around during transport, reducing damage to diamond tooling and power equipment. Standard mounting hardware often fails under the weight of heavy flat saws, core drill rigs, and concrete cutting accessories exposed to rough roads and abrasive jobsite conditions.
Grabber mounts are fabricated from heavy-gauge steel tubing and high-strength aluminum, finished with durable powder coating or zinc plating to resist rust and chemical exposure. Our inventory includes specialized solutions for every piece of concrete cutting gear: swing-out diamond blade racks holding up to 42″ blades, core bit organizers capacity-rated for full bit sets, single and triple hand saw brackets, vacuum pump tie-downs, wall saw track holders, and fuel can carriers. By bolting these heavy-duty mounts directly to your vehicle decks or toolbox interiors, operators maintain an organized mobile workspace and keep equipment ready for action.
At Grabber Power Products, every mounting assembly is engineered for heavy field use and long-term durability:
-
Diamond Blade Racks: Heavy-gauge steel tubing swing-out racks featuring spring latch locks and powder-coated or zinc-plated finishes, designed to carry diamond blades up to 42″ in diameter.
-
Core Bit & Drill Racks: 35″ tall steel bit organizers holding up to two full sets of closed-end core bits from 1″ to 12″, alongside aluminum hand core drill mounts with 1-1/4″ arbor reception.
-
Saw & Equipment Tie-Downs: Structural steel flat saw floor mounts, single and triple hand saw brackets, drum vacuum tie-downs, and vacuum pump mounts with 0.50″-13 all-thread fasteners.
-
Wall Saw & System Mounts: Precision-machined aluminum and steel brackets for Pentruder wall saw heads, motors, blade guards, inverters, tracks, and track brackets.
Diamond Blade Rack Mount
Click the image to see more
Our swing-out blade racks are able to carry up to a 42″ blade. These mounts save space while also organizing your blades.
• Holds up to a 42″ blade.
• Made from steel tubing.
• Spring latch lock.
• Zinc plated or powder coated.
Hand Core Drill Mounts
Click the image to see more
This hand drill mount is a perfect solution for your small hand held drill. Made from 100 % aluminum, it mounts just about anywhere you need access to your drills.
• Made from aluminum.
• Mounts directly to a backing plate or on a flat surface.
• Arbor reception: 1-1/4
Core Bit Organizer
Click the image to see more
Storing core bits can take up a lot of space and it can be difficult to keep track of bits sizes. With our core bit racks, you are able to carry up to two complete sets of closed-end bits from 1″ to 12″ as well as adapters and roto-bits.
• Made from steel tubing.
• Zinc plated.
• 35″ tall.
• Designed to bolt inside a tool box with min. height of 42″.
Hand Saw Mounts
Click the image to see more
Tired of seeing your handsaws sliding around your tool box? Our handsaw mounts are able to mount 3 seperate saws ranging from standard cut of saws to ring saws to small electric hand saws.
• Powder coat finish.
• Made from steel.
• Come in single or triple mounting options.
• Bolts directly down to a flat surface.
Ladder & Scaffold Mounts
Click the image to see more
Scaffolding can be a chore to load and unload on jobsites as well as storing on your truck or trailer. We design our scaffolding mounts to meet your needs in size and ease to access.
• Powder coat finish.
• Designed for use on multiple styles of scaffolding.
• Multiple tool mounting options.
Hook Mounts
Click the image to see more
Our cable racks are a great choice for hanging equipment cords and hose.
• Available in multiple sizes and lengths.
• Steel zinc plate or solid aluminum.
• Bolts directly to your tool box.
Vac Pump Mount
Click the image to see more
Designed for your core drill vacuum pump, this mount uses a .50″-13 all thread with an aluminum plate to fasten down your vacuum pump.
• Can be mount vertically on a backing plate or horizontally on a flat surface.
• .50″-13 all thread with wing nut
• Made from aluminum.
Core Drill Carriage Mounts
Click the image to see more
Our carriage mounts are available to fit two different size carriages (2.50″ to 2.875″) and is made from tempered aluminum.
• Made from 100% aluminum
• Bolts directly to a backing plate.
30 & 55 Gallon Drum Vacuum Mounts
Click the image to see more
Our vacuum mounts our specifically designed for use on our 20, 30 & 55 gallon vacuums.
• Made from mild steel.
• Designed for our 20, 30 or 55 gallon vacuums.
• Powder coat finish.
Walk-Behind Saw Mounts
Click the image to see more
We design our flat saw mounts to work directly with your current flat saw application.
• Made from steel tubing.
• Powder coat finish
• Mounts to your truck or trailer.
Pentruder Wall Saw Mounts
Click the image to see more
From blade guard mounts, motor mountsto inverter mounts, we have a wide array of wall saw mounts.
• Blade guard mounts.
• Motor mounts.
• Wall saw head mounts.
• Inverter mounts.
• Track bracket mounts.
• Wall saw track mounts.
Fuel Can Mounts
Click the image to see more
Made from aluminum, our fuel can mounts are able to secure 2.5 gallon to 5 gallon round fuel cans.
• Made from aluminum.
• Mounts to your truck or trailer application.
Slurry Slurp Mounts
Click the image to see more
Our “Slurry Slurp” mounts or designed for use on standard 5″ and 10″ slurry slurps. Made from aluminum, this mount can be mounted directly to your tool box.
• Holds 5″ to 10″ Slurry Slurp.
• Made from aluminum.
• Mounts directly to tool box.